In this article we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and tricks which you can use.
If you have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other regions of the house, you need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up which will look a little scary at first, but it’s really very straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape out of the cardboard, so you’ll need to cut around the edge of the mask so that you get something which resembles a cone. The most important thing here is to be realistic with what kind of paper plate that you’re using.
Then you’ll need to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can ensure that nothing will leak when you put the mask on. Be sure that the edges are cut so that the edges are not sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask , so you can work your way http://petodontorj.com.br/the-best-cheap-dog-food-finding-the-perfect-type-of-inexpensive-dog-food/ round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.
Don’t fret too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it’ll leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint once you are done, so you don’t wind up with smudges or smears on your dog.
Then it’s time to paste the mask on your dog’s head. First you will need to be certain that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you may begin to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the base of the mask and fold it over. Make certain it’s quite strong and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you have the mask snugged firmly onto the face of your dog. Do not make the folds too large or else it could look messy. Once you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask on the dog. Be sure the ears are flat and be sure that it is not too short or long as this can cause some issues with the mask slipping off the dog’s face.
If you are using a dog mask as your dog protection, you will have to do some sanding to be sure that it’s secure on your dog. You can do it by sanding off any excess paper which might have been eliminated from your mask.